الهندسة الميكانيكية
قائمة المنشورات العليمة لقسم الهندسة الميكانيكية
1. Zaidi Asad, Feng Ruizhe, Malik Adil, Khan Sohaib, Shi Yue, Bhutta Asad, Shah Ahmer, Combining Microwave Pretreatment with Iron Oxide Nanoparticles Enhanced Biogas and Hydrogen Yield from Green Algae, Processes, Vol. 7, Iss. 1, pp.24, 2019
2. Khan Sohaib Z, Ahmed Umair, Qazi Sallar, Nisar Salman, Khan Muhammad A, Khan Kamran A, Rasheed Farrauk, Farhan Muhammad, Frequency and Amplitude Measurement of A Cantilever Beam Using Image Processing: With A Feedback System, 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp.888-895, Pakistan, 2019
3. Mujtaba Ahmed, Shahzad Majid, Mansoor Asif, Saquib Ahmad N, Khan Kamran A, Asif Muhammad, Khan Sohaib Z, Khan Muhammad A, Zai Behzad Ahmed, Prediction of Crack Depth and Fatigue Life of an Acrylonitrile Butadiene Styrene Cantilever Beam Using Dynamic Response, Journal of Testing and Evaluation, Vol. 48. Iss. 2, 2019
4. Zai Behzad Ahmed, Khan Muhammad A, Mansoor Asif, Khan Sohaib Z, Khan Kamran A, Instant dynamic response measurements for crack monitoring in metallic beams, Insight-Non-Destructive Testing and Condition Monitoring, Vol. 61, Iss.4, pp.222-229, 2019
5. Zaidi Asad A, RuiZhe Feng, Malik Adil, Khan Sohaib Z, Bhutta Asad J, Shi Yue, Mushtaq Kashif, Conjoint effect of microwave irradiation and metal nanoparticles on biogas augmentation from anaerobic digestion of green algae, International Journal of Hydrogen Energy, Vol. 44, Iss. 29, pp.14661-14670, 2019
6. Khan Sohaib Z, Masood SH, Ibrahim Essam, Ahmad Zaini, Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling, Virtual and Physical Prototyping, DOI: 10.1080/17452759.2019.1615750 2019
7. Khan Muhammad Ali, Shahid Muhammad Atayyab, Ahmed Syed Adil, Khan Sohaib Z, Khan Kamran A, Ali Syed Asad, Tariq Muhammad, Gear misalignment diagnosis using statistical features of vibration and airborne sound spectrums, Measurement, https://doi.org/10.1016/j.measurement.2019.05.088 2019
8. Waqas Hafiz Muhammad, Shi Dongyan, Imran Muhammad, Khan Sohaib Z, Tong Lili, Zaidi Asad A, Iqbal, Javid Ahmed Waqas, Conceptual Design of Composite Sandwich Structure Submarine Radome, Materials Vol. 12, Iss. 12, pp.1966, 2019
9. M. Ouzzane, Bady M, A Theoretical Analysis of Air Cooling System Using Thermal Ejector under Variable Generator Pressure, Conference: ICEECP: International Conference on Energy, Environmental and Climate Policy, Malaysia, 2019
10. Essam R.I. Mahmoud, Ali Algahtani, Erosion and corrosion resistance of Plasma Electrolytic Oxidized 6082 Aluminum Alloy Surface at Low and High Temperatures, Journal of Materials Research and Technology, Vol. 8, Iss. 3, pp.2699-2709, 2019
11. D.Lafri, D. Semmar, A. Hamid, M. Ouzzane, Experimental Investigation on Combined Sensible and Latent Heat Storage in Two Different Configurations of Tank Filled By PCM, Applied Thermal Engineering, Vol. 149, pp.625-632, 2019
12. M. Badache, M. Ouzzane, P. Eslami-Nejad, Z. Aidoun, Experimental study of a carbon dioxide direct-expansion ground source heat pump (CO2-DX-GSHP), Applied Thermal Engineering, Vol. 130, pp.1480–1488, 2018
13. Nour M., EL-Seesy A.I., Abdel-Rahman A.K., Bady M., Influence of Adding Aluminum Oxide Nanoparticles to Diesterol Blends on the Combustion and Exhaust Emission Characteristics of a Diesel Engine, Experimental Thermal and Fluid Science, Vol. 98, pp.634–644, 2018
14. Komalapur V. R., Hussain Khaleed, Gaphur A., Udayaprasanna H., Optimization of AA7075 autonomous underwater vehicle (auv) propeller front hub pre-form sizing for flash-less cold forging process – a FE study, Conference: International Journal of Latest Trends in Engineering and Technology, Vol. 9, Iss. 3, pp.140-147, India, 2018
15. Ahmed HE, Kherbeet ASh, Ahmed MI, Salman BH, Heat transfer enhancement of micro-scale backward-facing step channel by using turbulators "International Journal of Heat and Mass Transfer
16. " Vol. 126, pp.963-973, 2018
17. Tariq Mateen, Nisar Salman, Shah Aqueel, Akbar Sohaib, Khan Muhammad A, Khan Sohaib Z, Effect of hybrid reinforcement on the performance of filament wound hollow shaft, Composite Structures, Vol. 184, pp.378-387, 2018
18. Zahid Umer, Khan Sohaib Z, Khan Muhammad A, Bukhari Hassan, Ahmed Imran, Khan Kamran A, A methodology for flexibility analysis of process piping, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 232, Iss. 6, pp.751-761, 2018
19. Tariq Mateen, Nisar Salman, Shah Aqueel, Mairaj Tariq, Akbar Sohaib, Khan Muhammad A, Khan Sohaib Z, Effect of carbon fiber winding layer on torsional characteristics of filament wound composite shafts, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, Iss. 4, pp.198, 2018
20. Asif Muhammad, Khan Muhammad A, Khan Sohaib Z, Choudhry Rizwan S, Khan Kamran A, Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review, Journal of Composite Materials, Vol. 52, Iss. 26, pp.3589-3599, 2018
21. Siddiqui MZ, Khan Sohaib Z, Khan MA, Shahzad M, Khan KA, Nisar S, A novel test configuration design method for inverse identification of in‐plane moduli of a composite plate under the PFEUM framework, Strain, Vol. 54, Iss. 5, pp.e12280, 2018
22. Shah Aqueel, Khan Kamran, Khan Sohaib Z, Nisar Salman, Shahzad MA, Shahzad Majid, Park MK, Khan MA, Zai Behzad A, Low-Velocity Impact Characterization of Fiber-Reinforced Composites with Hygrothermal Effect, Journal of Testing and Evaluation, Vol. 47, Iss. 1, 2018
23. Zaidi Asad A, RuiZhe Feng, Shi Yue, Khan Sohaib Z, Mushtaq Kashif, Nanoparticles augmentation on biogas yield from microalgal biomass anaerobic digestion, International Journal of Hydrogen Energy, Vol. 43, Iss. 31, pp.14202-14213, 2018
24. Zaidi Syed Asad A, Shi Yue, Khan Sohaib Z, Malik Adil, Mushtaq Kashif, Biogas production via microalgal biomass anaerobic fermentation–Experimental and modelling approach, 17 International Conference on Sustainable Energy Technologies –SET2018, China, 2018
25. Khan, MA, Khan, KA, Khan Sohaib Z, Nisar S, Starr A, Fracture life estimation of Al-1050 thin beams using empirical data and a numerical approach, Insight-Non-Destructive Testing and Condition Monitoring, Vol. 60, Iss. 7, pp.363-368, 2018
26. Algahtani Ali, Mahmoud Essam, Khan Sohaib, Tirth Vineet, Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy, Processes, Vol. 6, Iss. 12, pp.240, 2018
27. Zahid Umer, Khan Sohaib Z, Khan Muhammad A, Bukhari Hassan, Nisar Salman, Khan Kamran A, A methodology for flexibility analysis of pipeline systems, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, https://doi.org/10.1177/0954408918812275 2018
28. Maharjan Gopal K, Khan Sohaib Z, Riza Syed H, Masood SH, Compressive Behaviour of 3D Printed Polymeric Gyroid Cellular Lattice Structure, IOP Conference Series: Materials Science and Engineering Vol. 455, Iss. 1, pp.12047, 2018
29. Choudhry, RS, Sharif Tahir, Khan Kamran A, Khan Sohaib Z, Hassan Abid, Khan Muhammad A, Predicting the effect of voids on mechanical properties of woven composites, IOP Conference Series: Materials Science and Engineering, Vol. 406, Iss. 1, pp.12007, 2018
30. H.M.T. Khaleed, A. Athani, T.M.Y. Khan, K. Govindaraju, Heat transfer in a conical porous medium due to inner and top surface heating: Effect of cone angle, AIP Conference Proceedings, Vol. 1953, pp.140050, India, 2018
31. K. H. M. T. Khalid, M. Pallan, M.F. Mulla, Heat transfer in porous annulus: Effect of aspect ratio, AIP Conference Proceedings, Vol. 1953, pp.140056, India, 2018
32. M.F. Mulla, Khalid. M. Pallan, K.H.M. T., Influence of radius ratio on heat transfer in porous annulus, AIP Conference Proceedings, Vol. 1953, pp.140059, India, 2018
33. Ali Algahtani, Essam R.I. Mahmoud, Sohaib Z. Khan, Vineet Tirth, Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy, Processes, Vol. 6, Iss. 12, pp.240, 2018
34. Vineet Tirth, Ali Algahtani, Essam R. I. Mahmoud, Tribological characterization of stir cast 2218 alloy-5%-alumina-titania hybrid microcomposites developed by liquid forging, Materials Express, Vol. 8, Iss. 6, pp.475-488, 2018
35. Gulam Mohammed Sayeed Ahmed, Ali Algahtani, Essam R. I. Mahmoud, Irfan Anjum Badruddin, Experimental Evaluation of Interfacial Surface Cracks in Friction Welded Dissimilar Metals through Image Segmentation Technique (IST), Materials, Vol. 11, pp.2460, 2018
36. Wajid Hussain, Mohsin Jameel, Tayyab Naqash, Essam R. I. Mahmoud, A1091 Management and Assessment of Capstone Design Made Easy Using Learning Outcomes, International Conference on Education and Evaluation ICEE, Saudi Commission for Education Evaluation, KSA, 2018
37. Siddiqui, Muhammad Zeeshan, Khan Sohaib Z, Khan Muhammad A, Shahzad M, Khan KA, Nisar Salman, Noman Danish, A projected finite element update method for inverse identification of material constitutive parameters in transversely isotropic laminates, Experimental Mechanics, Vol. 57, Iss. 5, pp.755-772, 2017
38. Khan, MA, Basit Kanza, Khan Sohaib Z, Khan K.A, Starr A.G, Experimental assessment of multiple contact wear using airborne noise under dry and lubricated conditions, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 231, Iss. 12, pp.1503-1516, 2017
39. Khan Sohaib Z, Masood S.H, Cottam Ryan, Mechanical properties of a novel plymetal manufactured by laser-assisted direct metal deposition, The International Journal of Advanced Manufacturing Technology, Vol. 91(5–8), pp.1839–1849, 2017
40. Eltyeb F.B., Mahmoud A.M., Awaludin M. Shaharon, Effect of Oil Price Volatility on Construction Projects in United Arab Emirates, International Journal of Engineering Research and Reviews, Vol. 5, Iss. 1, pp.28-31, 2017
41. Eltyeb F.B., Mahmoud A.M., Awaludin M. Shaharon, Risk Based Life Cycle Costing Evaluation of Construction Projects in United Arab Emirates (UAE), International Journal of Engineering Research and Reviews, Vol. 5, Iss .1, pp.32-37, 2017
42. M. Nour, H. Kosaka, S. Sato, M. Bady, A.K. Abdel-Rahman, K. Uchida, Effect of ethanol/water blends addition on diesel fuel combustion in RCM and DI diesel engine, Energy Conversion and Management, Vol. 149, 2017
43. M. Nour, H. Kosaka, M. Bady, S. Sato, A.K. Abdel-Rahman, Combustion and emission characteristics of DI diesel engine fuelled by ethanol injected into the exhaust manifold, Fuel Processing Technology, Vol. 164, 2017
44. G. Elshafei, A. Negm, M. Bady, M. Suzuki, M.G. Ibrahim, Numerical and Experimental Investigations of the Impacts of Window Parameters on Indoor Natural Ventilation in a Residential Building, Energy and Building, Vol. 141, 2017
45. A.I. El-Seesy, A.K. Abdel-Rahman, M. Bady, S. Ookawara, Performance, Combustion, and Emission Characteristics of a Diesel Engine Fueled by Biodiesel-Diesel Mixtures with Multi-walled Carbon Nanotubes Additives, Energy Conversion and Management, Vol. 135, 2017
46. H.E. Ahmed, M.I. Ahmed, Thermal performance of annulus with its applications; A review, Renewable and Sustainable Energy Reviews, Vol. 71, pp.170–190. 2017
47. H.E. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, M.I. Ahmed, B.H. Salman, A.Sh. Kerbeet, Turbulent heat transfer and nanofluid flow in a triangular duct with vortex generators, International Journal of Heat and Mass Transfer, Vol. 105, pp.495–504. 2017
48. Azeem, H.M.T. Khaleed, M.E.M. Soudagar, Fem Formulation of Heat Transfer in Cylindrical Porous Medium, IOP Conf. Series: Materials Science and Engineering, Vol. 225, Iss. 1, pp.012024, India, 2017
49. M. Hawi, A.K. Abdel-Rahman, M. Bady, S. Ookawara, Prediction of Diesel Combustion and Emission Characteristics in CI Engine Using CFD Simulations, Power Energy Conference ICOPE17, American Society of Mechanical Engineering (ASME), Paper No. ES2017-3058, pp. V001T02A001, USA, 2017
50. N. Benrachi, A. Smaili, L. Lamarche, M. Ouzzane, Numerical Analysis of a New Configuration of Ground-Air Heat Exchanger, International Renewable and Sustainable Energy Conference (IRSEC), pp.1-6, Morocco, 2017
51. Khan Sohaib Z, Khan Muhammad A, Tariq Muhammad, Khan Kamran A, Khan Tariq M, Ali Taha, Response of Gaussian-modulated guided wave in aluminum: An analytical, numerical, and experimental study, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 231, Iss. 16, pp.3057-3065, 2016
